Home › Services › Kitchen Cabinet Refacing

Houston Metro · Residential & Commercial

Kitchen Cabinet Refacing in the Houston Metro

Refacing sits between painting what you have and tearing the kitchen out, and the decision between the three is settled by the boxes, not by taste. Cabinet boxes are the part nobody sees and the part that determines whether new…

Licensed & Insured
20+ years remodeling
17 cities served
102 ZIP codes covered

Call (281) 235-6971 Request an estimate

In short

What the work involves

An assessment starts by emptying the sink base and looking at the floor, the back panel and the stiles for swelling, staining or delamination. Shelves are checked for sag, drawer bottoms for blowout, and hinge mortises for stripped screws. The face frames are checked for square, since a door that has never hung parallel usually means racked frames rather than bad hardware. Box construction is identified: plywood carcases with solid frames are refacing candidates, particleboard with melamine skins depend entirely on whether they have stayed dry. Layout is assessed honestly, because refacing changes surfaces and hardware, not where anything sits. If the cook is unhappy with the walk between sink and range, or an appliance needs a different opening, that is a replacement conversation. If the boxes are sound and only the fronts and finish are dated, refacing is on the table. If the boxes and the existing wood finish are both sound and only the colour is wrong, refinishing or painting is the cheaper honest answer.

What gets specified, and why

When refacing is the answer, the specification covers three things. Face frames and exposed box edges get a skin, either a pressure-sensitive wood veneer, a rigid thermofoil, or a laminate, each with different heat and moisture behaviour at the dishwasher and range. Doors and drawer fronts are new, in painted MDF, five-piece hardwood, slab plywood or thermofoil. Hardware is usually converted to concealed soft-close hinges and full-extension undermount slides, which is often the change people notice most day to day. Where boxes are sound but drawer boxes are not, new dovetailed or dowelled boxes go in without touching the carcases. Adhesive class matters here: pressure-sensitive backing is convenient but unforgiving of a dusty or greasy substrate, and contact adhesive needs correct flash time. Exposed end panels beside a dishwasher take heat and moisture and are worth specifying in a more durable material than the rest of the run.

Why the Gulf Coast changes this job

Two local realities push kitchens out of the refacing column. The first is water. Slow leaks from aged cast iron drains or galvanised supply lines in older inner-Houston homes, and shallow flooding anywhere in the metro, both reach box bottoms and toe kicks first. Particleboard that has swollen does not recover, and bonding new veneer to a substrate that has lost its integrity puts good material on a failing base. The second is slab movement. Post-tension slabs common in post-1985 Katy, Cypress and Fulshear stock move seasonally, and cabinets fixed to walls that move will rack. New doors on racked frames show it immediately, because uniform factory reveals make any out-of-parallel line obvious in a way that worn old doors did not. Neither issue disqualifies refacing on its own, but both need to be found and priced during assessment rather than discovered when the veneer is already open.

Where these jobs go wrong

The largest mistake is refacing over compromised boxes, usually because nobody emptied the sink base before quoting. The second is assuming refacing fixes function. New fronts do not add drawers, widen an aisle, change an appliance opening or fix a corner cabinet nobody can reach. The third is skipping frame correction, so factory doors go onto racked frames and every reveal advertises the problem. The fourth is preparing surfaces badly for adhesive, since old finish, cooking oil residue and sanding dust all defeat pressure-sensitive backing. Fifth, mixing new veneer against an old finished interior so that opening a door reveals the previous kitchen. Sixth, refacing when the doors themselves are the only sound part of the kitchen and the money would go further elsewhere. Seventh, not checking whether the countertop and backsplash tolerate the work, since some sinks and stone details make face-frame access awkward and that belongs in the plan, not in a surprise mid-job.

What moves the price

Door and drawer opening count drives the number more than kitchen size. Door material and style change it substantially, as does whether drawer boxes and slides are replaced. Exposed end panels, island backs, glass fronts and open shelving each add. Matching a specific wood species and stain across veneer and doors costs more than a painted specification. Repairs found during assessment, such as rebuilding a sink base floor or re-securing racked frames, add carpentry before refacing begins. Interior refinishing, new shelving, crown or light rail, and toe kick replacement are separate items. Any electrical or plumbing change, such as adding under-cabinet lighting, is permitted work in Houston and is priced through the appropriate licensed trade.

How a project runs

Assessment opens cabinets rather than measuring the room. If the boxes pass, openings are measured individually, doors are ordered to those measurements, and the frames are prepared while lead times run. On installation, old doors and hardware are removed, frames cleaned and sanded, damage repaired, then veneer or laminate is applied to frames and exposed ends. New hinges and slides go in, doors are hung and adjusted until reveals are even, and hardware is set with pilot holes. If the boxes fail assessment, the honest recommendation is replacement rather than a reface that ages badly. To have the boxes actually looked at before any style discussion, call (281) 235-6971.

Common questions

How do I know my boxes are worth keeping?

Empty the sink base and look. Swollen or stained floor panels, a soft back wall, delaminating edges or shelves that sag under normal load all point away from refacing. Plywood carcases with tight joints and dry interiors are good candidates. Particleboard is not automatically disqualified, but it has to have stayed dry, and past leaks or flooding usually decide the question.

Will refacing fix doors that never sat straight?

Only if the frames are corrected first. Uneven doors are commonly caused by racked face frames following seasonal slab movement, not by the doors themselves. New fronts with factory-consistent reveals make any remaining misalignment more obvious, not less. Frame correction and shimming belong in the scope, and any structural cause in the house itself is a separate issue to address.

When is replacement clearly the better spend?

When the layout is the problem, when appliance openings need to change, when the boxes have taken water, or when so many components need replacing that only the carcase shells remain. Refacing is efficient precisely because it preserves sound boxes. Once the box itself is a repair project, that efficiency disappears and the money is better directed at new cabinetry.

Kitchen Cabinet Refacing by location

We cover 102 ZIP codes across the Houston metro. Pick the area closest to you:

Planning kitchen cabinet refacing?

We measure, look at the slab and the existing rough-in, and give you a scope you can actually compare against another bid.

Call (281) 235-6971

MS Home Remodeling · 1530 W Sam Houston Pkwy N, Houston, TX 77043 · (281) 235-6971

Kitchen remodeling

Cabinets & counters

Planning

Bathroom remodeling

Planning

Whole-home renovation

Additions

Interior

Exterior

Outdoor living

Flooring

Commercial remodeling

Build-out & occupancy

Building in Houston

Planning a project

Company

Where we work

Kitchen remodeling

Cabinets & counters

Planning

Start with a measured visit

Bathroom remodeling

Planning

Start with a measured visit

Whole-home renovation

Additions

Interior

Start with a measured visit

Exterior

Outdoor living

Flooring

Start with a measured visit

Commercial remodeling

Build-out & occupancy

Start with a measured visit

Building in Houston

Planning a project

Start with a measured visit

Company

Start with a measured visit

Where we work

Kitchen Cabinet Refacing in the Houston Metro

In short

What the work involves

What gets specified, and why

Why the Gulf Coast changes this job

Where these jobs go wrong

What moves the price

How a project runs

Common questions

Kitchen Cabinet Refacing by location

Planning kitchen cabinet refacing?

Related Remodeling Services