Home › Services › Kitchen Renovation

Houston Metro · Residential & Commercial

Kitchen Renovation in the Houston Metro

Two houses, one word. A 1968 ranch off Memorial and a 2004 two-storey in Cinco Ranch both get called a kitchen renovation, and the jobs part ways the moment the cabinets come off the wall. The older house hides cast iron drain,…

Licensed & Insured
20+ years remodeling
17 cities served
102 ZIP codes covered

Call (281) 235-6971 Request an estimate

In short

What the work involves

Work starts with discovery, not demolition. We open the sink base to see drain material and how the sink is vented, pull the panel cover, and run a level across the cabinet run. Then protection: zip walls at the openings, floor cover on the haul route, a temporary kitchen somewhere the household can tolerate. Demolition takes out countertop, cabinets, appliances and flooring, and opens the wet wall when the plumbing looks doubtful. In a 1960s-80s house that usually means replacing galvanised branches with copper or PEX, transitioning cast iron with shielded couplings that are supported rather than left hanging, and correcting a sink vent that was never right. Electrical adds dedicated appliance circuits and GFCI protection at the counter, and where aluminium branch wiring appears, terminations are corrected with connectors listed for that use. In a 2000s house the rough-ins are usually sound, so effort moves to layout: relocating a range wall, cutting a hood duct path through the attic, feeding an island. Both jobs then converge on floor prep, drywall and skim, cabinets shimmed dead level, countertop templated after boxes are fastened, backsplash, sink and disposal, appliances, toe kick and scribe, caulk, punch list.

What gets specified, and why

Cabinet construction is the decision that outlives the rest. Plywood boxes with a moisture-resistant edge hold up in this climate where particleboard swells at the toe kick and around the sink base from ordinary humidity and small leaks. Painted doors move seasonally, so a rail-and-stile design with a floating panel tolerates our swings better than a slab door in a soft species. Quartz gives a consistent, non-porous surface with no sealing regimen; granite handles hot pans better and needs periodic sealing; a butcher block island is a maintenance commitment in a humid house. For flooring, porcelain tile over a crack isolation membrane is the durable answer over slab, and a good rigid-core vinyl plank is the practical answer where the slab has movement history and the budget will not carry the prep. In an older house, add a proper hood duct in rigid metal to the exterior, not flex through the attic, and closed-cell foam where an exterior wall is opened in a flood-exposed area.

Why the Gulf Coast changes this job

Both houses sit on slab over expansive clay, but they move differently. Older slabs are conventionally reinforced and have already done most of their cracking, so the tell is a floor that has settled an inch across a long run, which shows up as cabinets needing serious shimming and a dishwasher that will not sit level under the counter. Post-tension slabs in Katy, Cypress and Fulshear move more as a plate, and they cannot be cored for a relocated drain until the cables are located. Humidity is the constant. Inner-Houston kitchens often vented a range hood into the attic or nowhere at all, and years of cooking moisture show as stained decking above. Western-suburb kitchens usually have a duct, frequently undersized or crushed. Hard water is universal here and eats faucet cartridges and glass, which is a specification issue rather than a house-age issue.

Where these jobs go wrong

The common failures are sequencing and substrate. Cabinets set on an unmeasured slab, then templated for stone before they are fastened and levelled, produce a countertop with a visible fall and a dishwasher that will not clear. Tile laid straight over old cutback adhesive or over a slab crack without an isolation membrane telegraphs that crack within a season of wet-to-dry swing. In older houses, tying a new PVC drain into cast iron with an unshielded rubber coupling on a horizontal run, unsupported, is a slow leak waiting under a new cabinet. A relocated sink that keeps the old vent arrangement gurgles and pulls traps dry. On post-tension slabs, coring for an island drain without a scan is the mistake that turns a kitchen into a structural repair. Ducting a new hood into the attic to avoid a roof penetration puts cooking moisture into insulation that is already living at high humidity. Fixing all of it is planning and layout work, not skill under pressure.

What moves the price

Layout changes drive cost more than finishes do. Keeping sink, range and refrigerator near their existing services keeps plumbing, gas and electrical modest; moving the sink to an island adds a drain, a vent path, and possibly slab work. House age drives the second bucket: galvanised replacement, cast iron transitions, panel capacity, aluminium wiring correction, and asbestos-era ceiling texture that needs testing before it is disturbed. Then cabinet construction and door style, countertop material and edge, appliance package, and whether walls are removed. Structural removal brings in engineering and a beam. Permitting and inspection requirements differ between the City of Houston and unincorporated Harris or Fort Bend, and that affects scheduling as well as scope. Nobody should price this from a photograph.

How a project runs

We walk the kitchen first and look at the things that decide the budget: drain material, panel, floor level, vent path, and what is above and below the room. Selections are made before demolition so cabinets and countertop can be sequenced against real lead times rather than hopes. Demolition and rough-ins run together, inspections happen where the work requires them, then finishes go in the order that protects them. Countertop templating happens after cabinets are set. We hold a punch walk at the end and fix the list before final payment. To arrange a walkthrough, call (281) 235-6971.

Common questions

My house is from the 1970s. Should I expect the plumbing to be replaced?

Not automatically. Cast iron under slab can still be serviceable, and we would rather scope it than assume. What usually does get replaced is the galvanised branch piping in the wall, because it scales closed from the inside and drops pressure at the new faucet. If the sink moves, the vent arrangement gets corrected at the same time.

Can I put an island with a sink in my Katy house?

Often yes, but the slab decides. Post-tension slabs are common in that housing stock and the tendons must be located before anything is cored or trenched. If a scan shows the routing will not allow it, the alternatives are a prep island without plumbing, or relocating the sink to a wall run that already has services nearby.

Is a newer kitchen cheaper to renovate than an older one?

Usually, because the rough-ins, panel and duct paths are already close to current practice, so more of the money buys finishes. The offset is that newer builder cabinets are frequently particleboard, so refacing is rarely worth it and the boxes get replaced. Older kitchens cost more in the walls and less in surprises above the ceiling.

Kitchen Renovation by location

We cover 102 ZIP codes across the Houston metro. Pick the area closest to you:

Planning kitchen renovation?

We measure, look at the slab and the existing rough-in, and give you a scope you can actually compare against another bid.

Call (281) 235-6971

MS Home Remodeling · 1530 W Sam Houston Pkwy N, Houston, TX 77043 · (281) 235-6971

Kitchen remodeling

Cabinets & counters

Planning

Bathroom remodeling

Planning

Whole-home renovation

Additions

Interior

Exterior

Outdoor living

Flooring

Commercial remodeling

Build-out & occupancy

Building in Houston

Planning a project

Company

Where we work

Kitchen remodeling

Cabinets & counters

Planning

Start with a measured visit

Bathroom remodeling

Planning

Start with a measured visit

Whole-home renovation

Additions

Interior

Start with a measured visit

Exterior

Outdoor living

Flooring

Start with a measured visit

Commercial remodeling

Build-out & occupancy

Start with a measured visit

Building in Houston

Planning a project

Start with a measured visit

Company

Start with a measured visit

Where we work

Kitchen Renovation in the Houston Metro

In short

What the work involves

What gets specified, and why

Why the Gulf Coast changes this job

Where these jobs go wrong

What moves the price

How a project runs

Common questions

Kitchen Renovation by location

Planning kitchen renovation?

Related Remodeling Services