We handle ada bathroom remodel across 77545 in Fresno, roughly 18 miles from our Energy Corridor base.
An ADA-style bathroom remodel is a dimensions problem long before it is a finishes problem. Clear floor space, door width, and the path from the doorway to each fixture decide everything else. In a Houston house that usually means at least one wall moves, because the hall bath in a 1970s ranch off Memorial or an early-80s two-story in Spring Branch was framed for a walking adult and nothing else. We measure the approach first — hallway width, door swing, the turn into the room — before anyone talks about tile. If a wheelchair or walker cannot make the turn at the door, a well-built shower on the far side of the room does not fix the bathroom.
Why this is different on the Gulf Coast
The Gulf Coast detail that governs an accessible bathroom here is the slab. Almost every Houston-area house sits on slab-on-grade, and a large share of the post-1985 suburban stock in Katy, Cypress, and Fulshear is post-tension — steel tendons under tension inside the concrete. You do not saw-cut a post-tension slab on a hunch. Tendons have to be located first, and in plenty of houses the honest answer is that we build the floor up and ramp the approach rather than recess the concrete.
Those same slabs move with the clay under them. Expansive soil swells in a wet spring and shrinks in an August drought, and the bathroom shows it as a hairline in a long tile run or a door that binds by September. That is why movement joints go in at changes of plane and at the room perimeter, and why oversized format tile in a small accessible bath is a risk worth discussing before it is ordered.
Then humidity. Someone bathing seated takes longer and puts more moisture in the room than a quick standing shower, so exhaust capacity gets sized for the actual room and vented all the way outside — never into an attic that already runs warm and damp most of the year.
What we actually do
The work runs in a fixed order because each stage buries the one before it. We protect the path from your entry door to the bathroom, then take the room to studs and slab so the framing, the drain, and the supply lines are all visible at the same time. Anything we are going to move gets located now, not later.
Framing comes next: widening the door opening and setting a proper header if it is a load-bearing wall, squaring the shower opening, and installing continuous plywood backing across every wall that might ever carry a grab bar, a fold-down seat, or a support rail. We back the whole wet wall rather than guessing at three bar locations, because a stud-only guess is what forces the wall open again in five years.
Plumbing follows the framing. A relocated shower drain on a slab-on-grade house means cutting and repouring concrete, so we set that line and pressure-test before anything closes. Valves go in at a reachable height, offset toward the entry side rather than centered behind the spray.
Then waterproofing — a bonded sheet or liquid-applied membrane over the pan and up the walls, corners banded, drain flange sealed, and a flood test held overnight before a single tile is set. Tile, then a slip-resistant floor with a tight coefficient of friction, then grab bars, fixtures, the fan, lighting, and the door hardware.
What moves the price
The single biggest swing is whether walls move. Widening a doorway inside a non-structural partition is straightforward carpentry. Widening one in a bearing wall brings in a header, temporary support, and usually a permit, and that is a different job.
The second is the drain. If your existing shower drain lands where the new one needs to be, you keep the concrete closed. If it does not, you are cutting slab, repiping, repouring, and waiting on the concrete — and on a post-tension slab you add tendon location before any of it.
After that: how the curbless entry is achieved, whether the floor is built up or the slab recessed, tile size and pattern, and whether you want a linear drain or a center drain. Fixture spec matters less than people expect. A well-chosen pressure-balanced valve and a solid handheld on a slide bar are not the expensive part.
Costs on accessible bathrooms land in a wide range, and the range is driven almost entirely by structure and plumbing rather than by finish.
Fresno housing stock
Fresno is an unincorporated part of northern Fort Bend County, and it is not one kind of housing. There are older rural properties that have been added onto over the years, and there are subdivisions built from the 1990s onward carrying the same builder-grade package you see across the metro: slab on grade, brick and siding, particleboard cabinet boxes, laminate counters, a small primary bath with a corner tub. Two things shape the work here. The expansive clay underneath means slab movement shows up as binding doors, hairline cracks over door openings, and grout that fails in a straight line — worth understanding before you spend money on flooring. And humidity: exhaust that actually moves air out of the house, rather than dumping it into the attic, is not an upgrade, it is the baseline. Common projects are kitchen and bath updates, flooring, and garage conversions. Permitting runs through the county rather than a city building department.
What to expect
We start with a measured site visit and a conversation with the person who will actually use the room — reach, transfer side, whether the chair pivots left or right, whether a caregiver needs space to stand. That drives the layout more than any published dimension does.
From there we produce a plan and a written scope, pull the plumbing and electrical permits that apply to your jurisdiction, and schedule. Permitting in the City of Houston is not zoning — the city does not zone — but plumbing, electrical, and structural work is permitted and inspected. Unincorporated Harris County and Fort Bend County handle it differently, and a Katy or Fulshear address may also sit under deed restrictions or an HOA review.
Then demo, rough-in and inspection, waterproofing and flood test, tile, trim out, and a walkthrough where we test every bar, every transfer, and the door with the actual chair in the room.
If you want that first measured visit, call (281) 235-6971.
Common questions
Does my house legally have to meet ADA?
No. The ADA governs public accommodations and commercial facilities, not private single-family homes. What people usually mean by "ADA bathroom" at home is a bathroom built to accessible dimensions borrowed from those standards. That is a useful starting point, but the room should be built around the person using it — their reach, their transfer side, their equipment — not around a published figure that may not fit them.
Can you do a curbless shower on a concrete slab?
Usually, by one of three routes: recessing the slab, building the surrounding floor up so the shower reads as flush, or a very low ramped threshold. Which one applies depends on your slab. If it is post-tension, the tendons must be located before any cutting, and in some houses building up the floor is the safer and cleaner answer rather than opening the concrete at all.
Should grab bar blocking go in even if we are not installing bars yet?
Yes, and it costs very little while the walls are open. We run continuous plywood backing across the wet wall and the toilet wall rather than blocking three specific spots. Needs change, equipment changes, and the transfer side someone uses today may not be the one they use later. Backing the whole wall means a bar can go anywhere without opening drywall again.
What does an accessible bathroom remodel cost in Houston?
It falls in a wide range, and the range is set by structure rather than finishes. A room where nothing structural moves and the drain stays put sits at the low end. Moving a bearing wall, widening a doorway with a new header, and cutting a post-tension slab to relocate a drain sits well above it. A measured site visit is the only way to price it honestly.
Do you cover Fresno 77545?
Yes. Fresno 77545 is about 18 miles from our shop at 1530 W Sam Houston Pkwy N, Houston, TX 77043, inside the area we work in daily. Call (281) 235-6971 to arrange a site visit.
MS Home Remodeling — ada bathroom remodel in Fresno, TX 77545. Call (281) 235-6971 for a site visit.